Air King EVLD Manuale delle Istruzioni Scaricare il pdf

IMPORTANT INSTRUCTIONS -

OPERATING MANUAL

SAVE THESE INSTRUCTIONS

www.airkinglimited.com

6727916 Rev. F 6-18 1 of 12

Exhaust Fan with Light

EVLD Series

READ AND SAVE THESE INSTRUCTIONS

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN

THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY

INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL

INJURY AND/OR PROPERTY DAMAGE!

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

GENERAL SAFETY INFORMATION

When using electrical appliances, basic precautions should

always be followed to reduce the risk of ﬁre, electric shock and

injury to person, including the following:

WARNING:

TO REDUCE THE RISK

OF FIRE, ELECTRIC SHOCK AND INJURY TO

PERSON, OBSERVE THE FOLLOWING:

a) Use this unit only in the manner intended by the manufacturer.If you have

questions, contact the manufacturer.

b) Before servicing or cleaning the unit, switch power off at service

panel and lock the service disconnecting means to prevent power

from being switched on accidentally. When the service disconnecting

means cannot be locked, securely fasten a prominent warning

device, such as a tag, to the service panel.

WARNING: TO REDUCE THE RISK

OF FIRE, ELECTRIC SHOCK AND INJURY TO

PERSON, OBSERVE THE FOLLOWING:

a) Installation work and electrical wiring must be done by qualiﬁed

person(s) in accordance with all applicable codes and standards,

including ﬁre-related construction.

b) Sufﬁcient air is needed for proper combustion and exhausting of

gases through the ﬂue (chimney) of fuel burning equipment to prevent

back drafting. Follow the heating equipment manufacturer’s guideline

and safety standards such as those published by the National Fire

Protection Association (NFPA) and the American Society for Heating,

Refrigeration, and Air Conditioning Engineers (ASHRAE), and the local

code authorities.

c) When cutting or drilling into wall or ceiling, do not damage electrical

wiring and other hidden utilities.

CAUTION: FOR GENERAL VENTILATING USE ONLY.

DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE

MATERIALS AND VAPORS.

d) Ducted fans must always be vented to the outdoors.

e) If this unit is to be installed over a tub or shower, it must be marked

as appropriate for the application and be connected to a GFCI (Ground

Fault Circuit Interrupter) – protected branch circuit.

f) Do not install in a ceiling with thermal insulation value greater than

R40.

g) This unit must be grounded.

h) To avoid motor bearing damage and noisy and/or unbalanced impellers,

keep drywall spray, construction dust, etc. off power unit.

i) Read all instructions before installing or using exhaust fan.

j) Suitable for use with electronic speed control device.

WARNING: DO NOT USE IN KITCHENS.

WARNING: THE DUCTING FROM THIS FAN TO THE

OUTSIDE OF THE BUILDING HAS A STRONG EFFECT

ON THE AIR FLOW, NOISE AND ENERGY USE OF THE FAN. USE

THE SHORTEST, STRAIGHTEST DUCT ROUTING POSSIBLE FOR

BEST PERFORMANCE, AND AVOID INSTALLING THE FAN WITH

SMALLER DUCTS THAN RECOMMENDED. INSULATION AROUND

THE DUCTS CAN REDUCE ENERGY LOSS AND INHIBIT MOLD

GROWTH. FANS INSTALLED WITH EXISTING DUCTS MAY NOT

ACHIEVE THEIR RATED AIRFLOW.

1 2 3 4 5 6 ... 11 12

Sommario

Pagina 1 - OPERATING MANUAL

IMPORTANT INSTRUCTIONS -OPERATING MANUALSAVE THESE INSTRUCTIONSwww.airkinglimited.com6727916 Rev. F 6-18 1 of 12Exhaust Fan with LightEVLD SeriesREAD

Pagina 2 - SECTION 5

www.airkinglimited.com6727916 Rev. F 6-18 10 of 12NOTE : Ce ventilateur est conçu pour le contact d’isolation directe (type IC). Il est aussi recomman

Pagina 3 - 6727916 Rev. F 6-18 3 of 12

www.airkinglimited.com6727916 Rev. F 6-18 11 of 12Guide de dépannage Trouble Cause Possible Solution Suggérée 1. Le ventilateur ne fonctionne pas

Pagina 4 - SECTION 6

www.airkinglimited.com6727916 Rev. F 6-18 12 of 12Tous les modèles# Qté. Description# de pièce de remplacement1 4 Traverses de Montage 5S12990022 1 As

Pagina 5 - CUSTOMER SERVICE:

INSTALLATION INSTRUCTIONSCAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE STARTING INSTALLATION.SECTION 1Preparing the Exhaust Fan1.

Pagina 6 - REPLACEMENT PARTS DIAGRAM

1b. Internal Wire Compartment: If the motor is already installed in the housing, remove the two screws holding the blower assembly in place. Lift up

Pagina 7 - MODE D’EMPLOI

SECTION 6Completing the Installation1. Use a sealant appropriate for contact with the building materials present and for the temperature requirements

Pagina 8

www.airkinglimited.com6727916 Rev. F 6-18 5 of 12Troubleshooting Guide Trouble Probable Cause Suggested Remedy 1. Fan does not operate when

Pagina 9

www.airkinglimited.com6727916 Rev. F 6-18 6 of 12REPLACEMENT PARTS DIAGRAM213164511141317All Models# Qty. Description Replacement Part #1 4 Mounting R

Pagina 10 - SECTION 8

INSTRUCTIONS IMPORTANTES – MODE D’EMPLOICONSERVER CES INSTRUCTIONSwww.airkinglimited.com6727916 Rev. F 6-18 7 of 12Ventilateur combiner, comprend lumi

Pagina 11 - SECTION 10

SECTION 4ConduitsNOTE: UN CONDUIT PLUS RIGIDE DE 6 PO OU PLUS EST RECOMMANDE POUR UNE MEILLEURE PERFORMANCE.ATTENTION : TOUS LES CONDUITS DOIVENT ÊTRE

Pagina 12 - Tous les modèles

www.airkinglimited.com6727916 Rev. F 6-18 9 of 12Figure 5VisCouvercle du Compartiment de Câblage1b. Compartiment de Câblage Intérieur: Enlever les tr